Bleed Valve for VTCA, VTC3, VTT3, WTC3, WTT3 Wet End
Manufacturer: Pulsafeeder
Manufacturer Model: L3300T03-PVC
$51.00 for 1+
Connection: 1/2" OD
Body Material: PVC
O-Ring Material: TFE
Includes: Teflon Gasket

For use with VTCA, VTC3, VTT3, WTC3 & WTT3 wet end configurations.

The L3300T03-PVC Bleed Valve Assembly attaches to the discharge fitting on the head of your Pulsatron metering pump. The purpose of the Bleed Valve is to help your pump prime properly and remove any air that may be trapped within the suction line.

Operation of the Bleed Valve Assembly is simple. Open the valve by turning the knob counter clockwise to bleed the air out of your suction line. Once the return line that is attached to the bleed valve is pumping mainly fluid, turn the knob clockwise to close the valve. At this point, any air in the line should be removed.

If you're having any issues operating the valve or priming your pump, take a look at the "How to Prime your Metering Pump" in our blog section or give us a call!

Shop by Brand

Pulsatron Parts and Accessories