Max Flow: 0.25 gph (6 gpd) / Max Pressure: 150 PSI / Head: 316SS / Seats: TFE / Ball: Ceramic / Control: Manual
Manufacturer: Pulsafeeder
Manufacturer Model: LS02S4-ATCG-XXX
Part Number: LS02S4-ATCG-XXX
$815.00 for 1+
Max Flow: 0.25 gph (6 gpd)
Max Pressure: 150 psi (10 BAR)
Power: 115 Volt / 50-60Hz
Head Fittings: 316 SS (Stainless Steel)
Seats / O-Rings: TFE (Teflon)
Balls: Ceramic
Tubing: 1/4" FNPT
Control: No Control Options Available

Pulsafeeder Pulsatron Series E-DC Metering pumps are leading the way in the development of metering technologies, to set the standard for accuracy, reliability and safety. These pumps are diaphragm type pumps that are positive displacement. The output volume is adjustable from zero to maximum capacity while they’re in operation. Each metering pump contains features that help reliability that include a timing circuit along with circuit protection against voltage / current upsets and solenoids that are protected by thermal overload with auto-reset. Providing excellent suction and priming characteristics, the state-of-the-art seat and ball design is guaranteed to never fail.

Controlling the metering pumps are very simple. Adjustments are made with an easily accessible dial knob that is located opposite of the liquid handling end that controls stroke length and frequency. Automatic control is done via 4-20mA DC and stop function inputs, and auto-off-manual switch.

The pump drive assembly is completely enclosed, and has no exposed moving parts. Housed in a enclosure at the rear of the pump, the electronics are protected to ensure no chemicals will come in contact with them. Around 130 watts is the average electric consumption.

If you’re looking for a specific configuration or a different suffix code than what is listed, please contact us so we can help you get the pump you need for your application!

Downloads

Shop by Brand